PCFlip

Project: F.E.A.R. (SFF)

Category

Case Mods

Status

Ready for Battle

Deets

This was one of my projects that was built purposely for the game
F.E.A.R. and houses an Intel Quad Q6600 G0 SLACR.

The build took place inside the Thermal Take Lanbox Lite and also
features a water cooling system inside to cool the Intel Quad so
that it could be overclocked to 3.6ghz. The other hardware in this rig is;

PSU : OCZ GameXStream 1010w Power Supply
Mobo: GIGABYTE GA-G33M-S2H LGA 775 Intel G33
Micro ATX Intel Motherboard
Ram: SUPER TALENT 4GB (4 × 1GB) 240-Pin DDR2 SDRAM
DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory
GPU: Radeon HD 2900 XT
HDD: Seagate Barracuda 7200.10 ST3750640AS 750GB 7200 RPM SATA 3.0Gb/s Hard Drive
DVD Drive: LITE-ON 20X DVD±R DVD Burner with LightScribe Black SATA Model LH-20A1L-06
Xbox 360 HD-DVD Drive

Cooling:
Swiftech H20-120 Compact Water Cooling Kit
AlphaCool Cape Bullseye Internal / External Reservoir
Feser One – F1 – Cooling Fluid – UV BLACK / RED (custom mix)
All other hardware will be cooled with the stock cooling.

This rig had a lot of modifications done to the unit to be able to house
the water cooling system. To find out more about this project and see
the project log with all the details and pictures of the work that was
done, check out PCFlip.com or for a direct approach click or copy and
paste the link below;
http://www.pcflip.com/forums/viewtopic.php?f=27&t=12

Short list of some of the Modifications done in this build;

- Painted interior of case black
– Mobo Tray, Optical cage, HDD Cage, and PSU Cage painted Red.
– Blue case lighting replaced with Red lighting
– Modified optical cage to make room for radiator
– Modified HDD Cage location to make room for Radiator and
graphics card.
– Installed top handle for easy transport
– Modified PSU cage and top cover to make room for Res.
– Took a part rear 60mm fans and painted the blades red
– Modified side plexi window to make room for the rad to exhaust air.
– Modified dual 120mm ACRyan grill to give a clean line between the
window and rad.
– Cut and installed Honeycomb Modder Mesh for the acrylic windows
– Custom Mix Black coolant from Feser-One.
– and much much more.

The whole rig weighs in at 34 pounds. :)

Here is a real quick one minute video on the rig…